Forum

DC ve AdDC kurulu b...
 
Bildirimler
Hepsini Temizle

DC ve AdDC kurulu bir networkun tamamen IP yapısını değiştirmek?

5 Yazılar
4 Üyeler
0 Likes
656 Görüntüleme
(@Anonim)
Gönderiler: 0
Konu başlatıcı
 

Merhaba,

Sistemimizde yıllardır kullandığımız bir yapımız var. Şirketimiz 5 ayrı ilde ofisi olan bir şirket. Bu illerdeki IP aralıkları farklı yapıda. merkezde DC ve Additional DC var. Bölgelerdede additional dc var. alınan ortak kararla tüm bölgeler ve merkez IP yapısı değişecek.

mevcut yapı 10.150.10.0/23 merkez

10.180.10.0/24

10.190.10.0/24 şeklindede bölgeler.

geçilmek istenen yapı

10.90.150.0 /16 merkez

10.90.180.0/24

10.90.160.0/24 de bölgeler

şeklinde

bu geçiş için nereden başlamalıyım? DC ve addDC lerde değişecek IPler bana ne sorun çıkarabilir? yardımlarınızı bekliyorum. iyi çalışmalar 

 

 
Gönderildi : 20/09/2011 17:47

(@fatihkaraalioglu)
Gönderiler: 3040
Illustrious Member
 

Merhaba;

Bu operasyon basit olmasıyla birlikte iyi bir plan/analiz vb... işlemler yapılması gerekmektedir.

İlk aklıma gelen öneriler

  • Network yapısının oturtulması, IP adreslerinin, uzak network ıp lerinin belirlenmesi
  • güvenlik duvarları üzerinde gerekli izinlerin verilmesi
  • Son kullanıcı bilgisayarları üzerinde yeni IP adrreslerinin (DNS,Wins) tanımlanması
  • Dhcp zonelerinin yapılandırılması

vb... bir çok konu başlığı yer almaktadır. Temel bilgileri paylaştım.

İşlem sonrası Dcdiag aracıyla testleri yapmayı ve raporları kontrol etmeyi ihmal etmeyelim.

Bunun haricinde aşağıdaki makaleyi incelemenizi önereceğim.

Change the Static IP Address of a Domain Controller

Updated: January 9, 2009

Applies To: Windows Server 2008, Windows Server 2008 R2

If you move a domain controller to a different site, you must change the IP address of the domain controller to an IP address that maps to a subnet that is associated with the site. To change an IP address, you use the TCP/IP client settings in the properties of the network connection. You can use this procedure to change all appropriate values in the TCP/IP client settings on a domain controller, including preferred and alternate DNS servers, as well as Windows Internet Name Service (WINS) servers (if appropriate). Obtain these values from your design team.

If you change the static IP address of a domain controller, make sure that the IP address is included in the respective Dynamic Host Configuration Protocol (DHCP) scope.

You must also verify that DNS resource records are updated on the DNS server that the domain controller references as the preferred DNS server in TCP/IP settings. In DNS, verify the values of the following resource records. If they have not updated automatically, update the IP address in these resource records:

  • Host (A) or host (AAAA) resource records
  • Name Server (NS) resource records

Use the DNS snap-in to update the following DNS values that apply to this domain controller:

  • On the Forwarders tab in the properties of a DNS server, update the IP address on DNS servers for which this domain controller is designated as a forwarder.
  • Use the procedure Update the IP Address for a DNS Delegation for all delegations to this domain controller.
  • On the Zone Transfers tab in the properties of a forward lookup zone, update the IP address for any primary or seconday DNS zone transfers to this domain controller.

Membership in Domain Admins, or equivalent, is the minimum required to complete this procedure. Review details about using the appropriate accounts and group memberships at Local and Domain Default Groups ( http://go.microsoft.com/fwlink/?LinkId=83477).

To change the static IP address of a domain controller

  1. Log on locally to the domain controller whose IP address you want to change.

  2. Click Start, point to Administrative Tools, click Server Manager, and then click View Network Connections.

  3. In the Network Connections dialog box, right-click the appropriate connection, and then click Properties.

  4. In the Connection Properties dialog box, double-click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6).

  5. In IP address, type the new address.

  6. In Subnet mask, type the new subnet mask if it has changed.

  7. In Default gateway, type the new default gateway.

  8. In Preferred DNS server, type the address of the Domain Name System (DNS) server that this computer contacts if it has changed.

  9. In Alternate DNS server, type the address of the DNS server that this computer contacts if the preferred server is unavailable.

  10. If this domain controller uses WINS servers, click Advanced, and then, in the Advanced TCP/IP Settings dialog box, click the WINS tab.

  11. If an address in the list is no longer appropriate, click the address, and then click Edit.

  12. In the TCP/IP WINS Server dialog box, type the new address, and then click OK.

  13. Repeat steps 11 and 12 for all addresses that have to be changed, and then click OK twice to close the TCP/IP WINS Server dialog box and the Advanced TCP/IP Settings dialog box.

  14. Click OK to close the Internet Protocol (TCP/IP) Properties dialog box.

 
Gönderildi : 21/09/2011 00:20

(@ugurdemir)
Gönderiler: 9888
Illustrious Member
 

Makaleden ilerleyebilirsiniz  http://www.totalnetsolutions.net/2007/07/29/how-to-change-a-domain-controller-ip/

 
Gönderildi : 21/09/2011 00:32

(@esersolmaz)
Gönderiler: 3204
Illustrious Member Yönetici
 

Merhaba,

Sistemimizde yıllardır kullandığımız bir yapımız var. Şirketimiz 5 ayrı ilde ofisi olan bir şirket. Bu illerdeki IP aralıkları farklı yapıda. merkezde DC ve Additional DC var. Bölgelerdede additional dc var. alınan ortak kararla tüm bölgeler ve merkez IP yapısı değişecek.

mevcut yapı 10.150.10.0/23 merkez

10.180.10.0/24

10.190.10.0/24 şeklindede bölgeler.

geçilmek istenen yapı

10.90.150.0 /16 merkez

10.90.180.0/24

10.90.160.0/24 de bölgeler

şeklinde

bu geçiş için nereden başlamalıyım? DC ve addDC lerde değişecek IPler bana ne sorun çıkarabilir? yardımlarınızı bekliyorum. iyi çalışmalar 

 

Merhaba;

10.90.150/16 diğer networkleride içine alır bu sebepten ötürü bu şekilde olmaz malesef ....

Address:   10.90.150.0           00001010.01011010 .10010110.00000000
Netmask: 255.255.0.0 = 16 11111111.11111111 .00000000.00000000
Wildcard: 0.0.255.255 00000000.00000000 .11111111.11111111
=> Network: 10.90.0.0/16 00001010.01011010 .00000000.00000000 (Class A)
Broadcast: 10.90.255.255 00001010.01011010 .11111111.11111111
HostMin: 10.90.0.1 00001010.01011010 .00000000.00000001
HostMax: 10.90.255.254 00001010.01011010 .11111111.11111110

 

 
Gönderildi : 21/09/2011 00:33

(@Anonim)
Gönderiler: 0
Konu başlatıcı
 

çok teşekkür ederim verdiğiniz cevaplar için.

Hocam bu IP konusu benimde dikkatimi çekmişti. acaba diye düşünüyordum.. yurtdışından bana böyle iletildi ? sizce atladıkları noktamı oldu yoksa arka tarafta başka bir düşüncelerimi vardır?

 

 
Gönderildi : 21/09/2011 10:59

Paylaş: