Forum
Bildirimler
Hepsini Temizle
HPE
2
Yazılar
2
Üyeler
0
Likes
686
Görüntüleme
Konu başlatıcı
Herkese iyi geceler ;
Elimizde hp ml 350 g5 serverimiz var uzerınde 2 adet 146 gb sas hdd var. raid 0+1 kurulu
sistem calısırken yesıl ve turuncu ısıklar bırlıkte yanıyor. Bu ne anlama gelır? bilgisi olan paylasırsa sevınırım. Teşekkürler.
Gönderildi : 24/02/2011 04:01
Merhaba,
HP tarafından yayınlanan dökümandaki LED kombinasyonları aşağıdaki gibidir. Bu açıklamayı kullanabilirsiniz. (Tüm HP HotPlug SCSI diskler için geçerlidir!)
Activity LED (1) | Online LED (2) | Fault LED (3) | Interpretation |
On, off, or flashing | On or off | Flashing | A predictive failure alert has been received for this drive. Replace the drive as soon as possible. |
On, off, or flashing | On | Off | The drive is online and is configured as part of an array. If the array is configured for fault tolerance and all other drives in the array are online, and a predictive failure alert is received or a drive capacity upgrade is in progress, you may replace the drive online. |
On or flashing | Flashing | Off | Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is rebuilding or undergoing capacity expansion. |
On | Off | Off | Do not remove the drive. The drive is being accessed, but (1) it is not configured as part of an array; (2) it is a replacement drive and rebuild has not yet started; or (3) it is spinning up during the POST sequence. |
Flashing | Flashing | Flashing | Do not remove the drive. Removing a drive may cause data loss in non-fault-tolerant configurations. One or more of the following conditions may exist:
|
Off | Off | On | The drive has been placed offline due to hard disk drive failure or subsystem communication failure.You may need to replace the drive. |
Gönderildi : 24/02/2011 12:10
