Forum

Netbackup ' da sene...
 
Bildirimler
Hepsini Temizle

Netbackup ' da senelerdir uğraştıran MSSQL yedeğinde yarıda kesilme problemi ve çözümü

2 Yazılar
2 Üyeler
0 Likes
991 Görüntüleme
(@malatya44)
Gönderiler: 5
Active Member
Konu başlatıcı
 

Netbackup kullanmaya başladım başlayalı bir yarıda kesilme problemidir, gidiyordu. Açılan caseler, yapılan çalışmalar fayda vermiyordu ki en son yurt dışından gelen mühendis kök sebebi tam olarak bulamasada bir çözüme kavuşturdu. Ben çektim, siz çekmeyin. Buyrun çözüm:

 

Backline Root Cause Analysis

 

 

RCA Author:

 John Peters

 

 

Error Code/Message 

Error 13 

Diagnostic Steps 

Verbose logging,
TCP dumps, Media,Master,client I/O parameter adjustments

Related E-Tracks

 

3445293

Problem Description 

 MS SQL
backups are failing randomly if MSDP is used.

Cause 

It
is believed that several adjustments that have been done on Master and Media
Servers  have resolved the issues .  Engineering believes that both
Network and IO tuning ended the congestion, hence the bottleneck, resulting
NBU to successfully complete backups.

Solution 

 Master,
Media Server and client side, I/O parameter adjustments.

Resolution Criteria 

 ----

Description Resolution  (if Criteria
is not met) 

 

In our attempts
to determine the root cause of the status 13 failures

when backing up
SQL databases to MSDP using media side deduplication,

 

From the initial
logs we could see that after some time, the dbclient

process attempted
to send data to the appliance, ie :

16:07:53.335
[17300.26824] <4> VxBSASendData: INF - entering SendData.

16:07:53.335
[17300.26824] <4> dbc_put: INF - sending 65536 bytes

16:07:53.335
[17300.26824] <2> writeToServer: bytesToSend = 65536 bytes

16:07:53.335
[17300.26824] <2> writeToServer: start send -- try=1

16:08:12.224
[17300.26824] <16> writeToServer: ERR - send() to server

on socket failed:

This message
occurs a as a consequence of the OS library call send()

returning a
non-zero status attempting to send data to a file

descriptor (
socket ) that is associated with a network connection.

When this failure
occurs, dbclient sends a failure status to the media

server and bpbrm
terminates the job resulting in the status 13. The OS

library call to
recv() data on the media server does not receive any

data or
indication from other end of the network connection at the time

of the failure
which indicates that the TCP stacks on the two hosts are

not in agreement
on the state of the connection.

What we needed to
find out was if the problem was occurring in the TCP

stack on the
client or appliance side of that connection.

In order to
understand this, it was felt necessary to look at the

problem from a
TCP level, we hoped that this would show if data was

flowing or if
there was a plugin ingest issue.

For this to
happen, we would need to perform network packet capture

between the
hosts, as well as performing strace on bptm  processes

together with
full debug logging enabled.

This approach
poses a difficult problem based on the intermittent

nature of the
failures and the indeterminate time taken for jobs to

fail. The
resulting logs would be large and the tcpdump / straces enormous.

We attempted to
work around this by rotating the tcp capture logs and

terminating the
traces as soon as the job failed in an attempt to

capture the
critical information.

However, when we
set this test up, the additional load imposed by the

tracing and
logging impacted the appliance to such a degree that the

backup eventually
failed with a 13, unfortunately we do not feel that

this failure was
the same issue seen for earlier failures.

In this case when
the job was repeated with tracing turned off it was

successful.

 

 

In order to try
and prevent the issue occuring we made some

tuning changes to
components we felt were potentially the source of the

problem,  
specifically :

1) Increased the
TCP retransmission settings on the client to 15 (

http://support.microsoft.com/default.aspx?scid=kb;en-us;170359 )

2) Implemented
following settings on the appliance :

echo 128 >
/usr/openv/netbackup/db/config/CD_NUMBER_DATA_BUFFERS

  

echo 524288 >
/usr/openv/netbackup/db/config/CD_SIZE_DATA_BUFFERS

 
  

echo 180 > /usr/openv/netbackup/db/config/CD_UPDATE_INTERVAL

touch
/usr/openv/netbackup/db/config/CD_WHOLE_IMAGE_COPY

echo 0 >
/usr/openv/netbackup/NET_BUFFER_SZ

echo 0 >
/usr/openv/netbackup/NET_BUFFER_REST

echo 256 >
/usr/openv/netbackup/db/config/NUMBER_DATA_BUFFERS

echo 512 >
/usr/openv/netbackup/db/config/NUMBER_DATA_BUFFERS_DISK

echo 16 >
/usr/openv/netbackup/db/config/NUMBER_DATA_BUFFERS_FT

  

echo 1500 >
/usr/openv/netbackup/db/config/OS_CD_BUSY_RETRY_LIMIT

 
  

echo 262144 >
/usr/openv/netbackup/db/config/SIZE_DATA_BUFFERS

echo 1048576 >
/usr/openv/netbackup/db/config/SIZE_DATA_BUFFERS_DISK

  

echo 262144 >
/usr/openv/netbackup/db/config/SIZE_DATA_BUFFERS_FT

   
  

echo 3600 >
/usr/openv/netbackup/db/config/DPS_PROXYDEFAULTRECVTMO

echo 3600 >
/usr/openv/netbackup/db/config/DPS_PROXYDEFAULTSENDTMO

touch
/usr/openv/netbackup/db/config/DPS_PROXYNOEXPIRE

echo 5000 >
/usr/openv/netbackup/db/config/MAX_FILES_PER_ADD

3) Set
/usr/openv/pdde/pdcr/etc/contentrouter.cfg

PrefetchThreadNum=16

MaxNumCaches=1024

ReadBufferSize=65536

WorkerThreads=128

4) Set
/usr/openv/lib/ost-plugins/pd.conf

 

PREFETCH_SIZE =
67108864

CR_STATS_TIMER =
300

 

5) Modified the
"Client Communication Buffer size"

 

Host properties
--> Client Settings --> Communication Buffer size set

to 256kb

 

 

6) MSSQL script
was modified :

 

BUFFERCOUNT to 2

STRIPE to 4

 

7) Additionally
we would always advise to check the "resolution"

section of this
technote http://www.symantec.com/docs/TECH37372

 

 

 

 

 

 

 

 

 

 

 

 

 

 Link: http://sysarticles.com/netbackup-da-senelerdir-ugrastiran-mssql-yedeginde-yarida-kesilme-problemi-ve-cozumu/

 
Gönderildi : 02/04/2014 17:43

Hakan Uzuner
(@hakanuzuner)
Gönderiler: 32965
Illustrious Member Yönetici
 

Merhaba Ali,

Çok teşekkür ediyorum, gerçekten çok başarılı bir paylaşım olmuş.

Emeğine sağlık.

Danışman - ITSTACK Bilgi Sistemleri
****************************************************************
Probleminiz Çözüldüğünde Sonucu Burada Paylaşırsanız.
Sizde Aynı Problemi Yaşayanlar İçin Yardım Etmiş Olursunuz.
Eğer sorununuz çözüldü ise lütfen "çözüldü" olarak işaretlerseniz diğer üyeler için çok büyük kolaylık sağlayacaktır.
*****************************************************************

 
Gönderildi : 02/04/2014 19:51

Paylaş: