Merhaba
AP tanımı ; kablosuz ağları kablolu ağlar ile buluşturan cihaz olarak geçmekte olup bu cihazların kablosuz ağları genişletmek için bir takım özelliklere ihtiyaç duymaktadır ki biz bunları aşağıdaki şekilde açıklayabiliriz
Access Point (AP) Configurations:
Mode 1 - Gateway. This is the most prevalent mode of all Entry Level Cable/DSL Routers, and Access Points. In this mode the hardware acts as a Wireless Hub connecting to Wireless Clients that are installed on network computers (Wireless PCMCIA, Wireless USB, Wireless PCI, etc.).
Mode 2 - Bridge. Most APs can also be configured as a Bridge. In such Configuration the AP can only communicate with another AP that is configured as a Bridge. This mode is useful to Bridge two LAN segments that are apart, and it is preferred to connect them wirelessly. Plug one AP Bridge to a Switch on the first LAN, the other AP to a Switch on the second LAN, and they are connected.
Mode 3 - Client. Few APs can also be configured as Clients. In such a configuration they act as a "Fancy" regular Wireless card that usually goes on a computer. Under such configuration The AP can only communicate with Wireless Cable/DSL Router or an AP configured as a Gateway.
Mode 4 - Repeater. Few Entry Level APs (D-Link 900AP+, Linksys WAP11) can work as a Repeaters. It acts like a client to receive a signal a Wireless source (regular Wireless Router, or AP), and then switches to AP mode to broadcasts to regular clients. Such a configuration can be used to extend the range of a Wireless LAN.
bu durumda sizin dsl modeminizin bridge olma şansı olmadığı için ( eğer bir adet daha ap olsaydı ikisini bridge yapıp birini kablo ile modem e bağlayabilirdiniz ) size bir repeater gerekmektedir.
out of service - ASKER
MVP
don't waste your time , ask cozumpark
---
Herkes cevapladığı soruları cevapladıklarım bölümünden takip ederse sorular sonuca ulaşır.
---
hakanuzuner.comÇözümPark Bannerları